🧱 Concreting — Central Logan, Logan
Compare 23 concreting operators servicing Central Logan. Driveways, paths, slabs and decorative concrete.
Plain driveway, per square metre: $95 – $165
Central Logan has affordable, established housing through Woodridge, Kingston and Springwood with an active home-improvement and maintenance market across owner-occupier and rental properties.
Concrete work in SEQ covers everything from house slabs to decorative pours (exposed aggregate, stamped, polished). Pricing varies hugely by finish: a plain driveway and a polished-concrete slab look the same on quote until you read the line items.
Concreting operators covering Central Logan
Operators with confirmed presence in Central Logan.
BP Concrete Pumping
Listed📍 Slacks Creek
Cantwell Concreting
Listed📍 Logan Central
Carroll Group Aus
Listed📍 Kingston
Chris Murray Concreting
Listed📍 Slacks Creek
Cobble Patch Landscape Supplies
Listed📍 Kingston
Cobblestone Paving Brisbane
Listed📍 Springwood
Concrete Genie Pty Ltd
Listed📍 Slacks Creek
Concrete Stone Care Qld Pty Ltd
Listed📍 Daisy Hill
Concut
Listed📍 Springwood
Conquest Concreting
Listed📍 Underwood
Construction Sciences Brisbane (Kingston)
Listed📍 Kingston
Durable Concrete Coatings® Epoxy Supplies Brisbane
Listed📍 Underwood
Hymix - Springwood
Listed📍 Slacks Creek
Logan Concrete Sawing and Drilling Pty Ltd
Listed📍 Underwood
McGinn Concrete
Listed📍 Kingston
Nucon Concrete - Logan
Listed📍 Underwood
Nuway Landscape Supplies Pavers & Walls Logan
Listed📍 Slacks Creek
Patterned Concrete
Listed📍 Kingston
Perma Colour Pty Ltd
Listed📍 Slacks Creek
Roof & Concrete Service
Listed📍 Woodridge
Specialised Concrete Pumping
Listed📍 Slacks Creek
Sunmix Concrete Pty Ltd
Listed📍 Kingston
Wagners concrete Slacks Creek
Listed📍 Slacks Creek
Suburbs we cover in Central Logan
📅 When to book
Plain pours 2-4 weeks. Decorative work (exposed aggregate, polished, stamped) needs 3-6 weeks for material lead-time. Avoid wet-season pours where possible.
📋 License & verification
Concrete work over $3,300 requires QBCC license. Structural slabs (homes, retaining) need engineer-certified design + QBCC builder, not just a concreter.
⚠️ Common mistakes
- •Skipping the moisture barrier on a slab — leads to rising damp years later
- •Ordering inadequate concrete strength for the application — N20 for footpath, N25 minimum for driveway, N32+ for structural
- •Under-speccing reinforcement or thickness for the load — a driveway carrying vehicles needs more than a path; under-spec concrete cracks and can't be patched cheaply
Concreting in Central Logan — FAQs
How long before I can drive on a new driveway?
Foot traffic at 24 hours, light vehicles at 7 days, heavy trucks at 28 days when concrete reaches design strength. Don't park heavy vehicles or trailers on it before then.
What's the difference between exposed aggregate and stamped concrete?
Exposed aggregate reveals the stone within the mix — durable, slip-resistant, costs ~30% more than plain. Stamped concrete is texturally pressed to look like pavers or tiles — high upfront cost but no jointing maintenance.
How much does a concrete driveway cost in SEQ?
Plain concrete is cheapest per square metre; exposed aggregate and coloured finishes cost more, and stamped or polished more again. Site prep, fall, drainage and access drive the final number — get an on-site measure-and-quote.
How long before I can drive on new concrete?
You can usually walk on it after 24-48 hours, but wait about 7 days before driving a car onto a new driveway and up to 28 days for full strength. Loading it early is a common cause of cracking.